Hot tubs for sale in the Fraser Valley

The right hot tub for a Fraser Valley backyard is the one that fits the people using it, fits through your gate and onto a proper base, runs on the power you have or can add, and holds its heat through a wet winter. Start with size, then seating, then the details that decide how it is to own.

Start with size

Pick the size for how many people will use the tub most nights, not the biggest crowd you might host once a year. A bigger tub costs more to heat, weighs more on its base and needs more room to get into the yard.

These are typical ranges. Every model is different, and we'll give you the exact size, weight and power needs of any tub you're considering.

Seats and loungers

A lounger lets you stretch out full length, but it takes the space of about two seats, and it doesn't suit everyone: shorter people can find themselves floating, and taller people can run out of room. Sit in it before you decide. Seat depth matters too. A mix of deep and shallower seats lets adults and kids sit comfortably at the same time, and a raised cool-down seat is welcome on warm evenings.

Jets, pumps and controls

More jets doesn't mean a better massage. The pumps share their power across the jets, so a tub with fewer, well-placed jets can feel stronger than one covered in them. Look for jets aimed where you want them (neck, shoulders, back, calves, feet), adjustable jets, and diverter valves that send more flow to one seat. Many newer tubs also have app control over Wi-Fi, which is handy for turning the heat up before you get home.

Built for our winters

Fraser Valley winters are long, wet and grey, with cold snaps and the occasional heavy snowfall, more so out toward Abbotsford and Chilliwack. That puts a few details at the top of the list:

• Insulation: full-foam and perimeter (thermal-pane) insulation can both work well. What matters is that the cabinet, base and cover are sealed so heat stays in.
• A sealed base pan: keeps out ground moisture, drafts and rodents.
• Freeze protection: most tubs run their pumps automatically when the water gets too cold. Ask how it works on the tub you're looking at.
• The cover: a thick, tapered cover sheds rain and carries snow. It also does more for running costs than almost anything else.
• A cabinet that copes with rain: synthetic cabinets need little more than a rinse.

Power: 240V or plug-and-play

Most full-size tubs are hardwired to a dedicated 240-volt circuit, installed by a licensed electrician under a permit. A plug-and-play tub runs on a dedicated 120-volt outlet instead, which is simpler to install but heats more slowly. See hot tub electrical for what each needs.

Looking after the water

Every tub needs a sanitizer and balanced water. Some make it easier: ozone and UV systems help the sanitizer work, and saltwater systems make chlorine from dissolved salt so you add less by hand. Our water care guide explains the routine, including what the very soft water in much of the valley means for your tub.

What else to plan for

The tub is one part of the job. You'll also need a base that can carry it, the electrical connection, delivery into the yard (by crane if there's no way through), a cover lifter, steps and start-up chemicals. We quote the tub and the installation together, so you can see the full cost before you decide. Our hot tub prices page explains what drives each part.